SHADEONE® Accessories
|
SHADEONE® Winter protective bag |
Widths from 250 to 600cm |
 |
|
SHADEONE® Protective ceiling |
Widths greater than 250cm are linked with coupling parts in the middle |
 |
|
SHADEONE® Cord coiler |
For 11m of cord |
 |
|
SHADEONE® Design foundation |
Mobile foundation in the form of a high-quality plant trough. Size 1000x1000x500mm out of body construction plate 18mm strong with slats (mountain larch) 40x70mm clad, bevelcut corners, including 2-part lid.
Please note: filling is not included in the delivery range.
|
|
SHADEONE® Installation Accessories
|
SHADEONE® Screw foundation adaptor for floor plate |
INOX and BASIC columns including 4 screws as well as stainless steel plates |
 |
|
SHADEONE® Tightening bar |
For screw foundation |
 |
|
SHADEONE® Screw foundation set |
Including 4 clamp screws M12 x 25mm |
 |
|
SHADEONE® Screw foundation including adaptor |
Screw foundation including adaptor |
 |
|
SHADEONE® Floor plate |
– |
 |
|
SHADEONE® Design Pipe Clip (round) |
Made of brushed stainless steel for wall connection of round INOX column |
 |
|
SHADEONE® Design Pipe Clip (square) |
Made of brushed stainless steel for wall connection of square INOX column |
 |
|
SHADEONE® Design Pipe Clip (square) |
Made of brushed stainless steel for wall connection of square STRUCTURE column |
 |
|
SHADEONE® U-frame (square) |
With thread, counterplate and locking nuts for square SHADEONE® INOX column |
 |
|
SHADEONE® U-frame (round) |
With thread, counterplate and locking nuts for square SHADEONE® INOX column U-frame (round) |
 |
|
SHADEONE® Tension cord crank |
– |
 |
|
SHADEONE® Screw foundation set |
2 x screw foundation inc. screws, 2 x adapters inc. screws, 1 x tightening bar |
|
|
SHADEONE® Console |
Aluminium for wall connection column BASIC |
|
|
SHADEONE® Installation plate |
For cord clip and cord holder, brushed stainless steel |
|
SHADEONE® Individual Components
|
SHADEONE® Operating cord pulley INOX |
Including ball bearings and fender eyelet |
 |
|
SHADEONE® Operating cord pulley Basic |
Including fender eyelet |
 |
|
SHADEONE® Taper cover bar |
With logo, aluminium |
 |
|
SHADEONE® Cylinder |
ø85 mm x 1,8 mm, Anodised aluminium |
 |
|
SHADEONE® Stainless steel column Basic |
Includes floor plate and tensioning system |
 |
|
SHADEONE® Stainless steel column INOX (round) |
Without floor plate - includes tensioning system, floor plate available at an extra cost. |
 |
|
SHADEONE® Stainless steel column INOX (square) |
Without floor plate - includes tensioning system, floor plate available at an extra cost. |
 |
|
SHADEONE® Stainless steel column, adjustable height |
Without floor plate - includes tensioning system, floor plate available at an extra cost. |
 |
|
SHADEONE® Tensioing element structure |
Includes tensioning system |
|
|
SHADEONE® Tensioing element |
for INOX column |
 |
|
SHADEONE® Wire rope clamp "Gripple" and Bowden cable |
Bowden cable length = 15cm |
 |
|
SHADEONE® Bent-arm crank |
Suitable for crank winder and inclination adjustment |
 |
|
SHADEONE® Console rail |
Not pre-drilled or anodised, choice of colours |
 |
|
SHADEONE® Crank geared coiler |
– |
|
|
SHADEONE® Sail connection rail with side caps |
Anodised aluminium or white |
 |
|
SHADEONE® Cord holder |
stainless steel, length 15cm |
 |
|
SHADEONE® Wall console (anodised aluminium) |
– |
 |
|
SHADEONE® Wall console (white) |
– |
 |
|
SHADEONE® Tension cord clip |
– |
 |
|
SHADEONE® Individual tension cable taper |
Left or right |
|
|
SHADEONE® Cable tension ring |
Including operating cord |
|
|
SHADEONE® Cover cap for connection rail |
Colour: grey or white |
|
|
SHADEONE® Replacement sail / exchange sail |
Ready made |
|